Jumpstarting a car battery is a simple process that can help you get back on the road if your car battery dies unexpectedly. Whether you left your headlights on overnight or your battery is simply old and needs replacing, jumpstarting your battery can give you the boost you need to get to your destination. In this blog post, we’ll go over step-by-step instructions on how to jump a car battery safely and effectively.
Step 1: Park the cars next to each other
The first step is to park the car with the good battery next to the car with the dead battery. Make sure both cars are in park, and turn off the engines.
Step 2: Locate the batteries
Next, locate the batteries in both cars. The battery is usually located under the hood, and is a rectangular or square box with two cables attached to it. The positive cable is usually red, and the negative cable is usually black.
Step 3: Connect the jumper cables
Take your jumper cables and connect the red clamp to the positive terminal on the dead battery. Then, connect the other red clamp to the positive terminal on the good battery. Next, connect the black clamp to the negative terminal on the good battery. Finally, connect the other black clamp to an unpainted metal surface on the car with the dead battery, such as a bolt or bracket.
Step 4: Start the good car
Start the car with the good battery, and let it run for a few minutes. This will allow the battery to charge the dead battery.
Step 5: Start the dead car
Try to start the car with the dead battery. If it doesn’t start, wait a few more minutes and try again. If it still doesn’t start, you may need to replace the battery.
Step 6: Remove the jumper cables
Once the car with the dead battery starts, remove the jumper cables in reverse order. Start by removing the black clamp from the unpainted metal surface on the car with the dead battery. Then, remove the black clamp from the negative terminal on the good battery. Next, remove the red clamp from the positive terminal on the good battery. Finally, remove the red clamp from the positive terminal on the dead battery.
Step 7: Let the car run
Let the car with the dead battery run for at least 15 minutes to ensure that the battery is fully charged. This will prevent the battery from dying again when you turn off the car.
Jumpstarting a car battery is a simple process that can save you from being stranded on the side of the road. Remember to follow the steps carefully and be cautious when working with batteries. If you are unsure of what you are doing, it is always best to call a professional for help.
Is it time for a new battery? Shop here.
Good Carma 
Leave a comment